1176020000 ACT20M-AI-2AO-S
| Version | Signal splitter, Configurable, with sensor supply, Input : I / U, Output : 2 x I/U |
| Order No. | 1176020000 |
| Type | ACT20M-AI-2AO-S |
| GTIN (EAN) | 4032248970087 |
| Qty. | 1 items |
| 114.3 mm | |
| Depth (inches) | 4.5 inch |
| Height | 112.5 mm |
| Height (inches) | 4.429 inch |
| Width | 6.1 mm |
| Width (inches) | 0.24 inch |
| Net weight | 80 g |
| Storage temperature | -40 °C...85 °C |
| Operating temperature | -25 °C...70 °C |
| Humidity | 40 °C / 93 % rel. humidity, no condensation |
| MTBF | 181 a |
| REACH SVHC | Lead 7439-92-1 |
| SCIP | 2f6dd957-421a-46db-a0c2-cf1609156924 |
| Input current | configurable 0...20 mA 4…20mA |
| Input resistance, current | 70 Ω |
| Input resistance, voltage | 500 kΩ |
| Input voltage | configurable 0(2)…10 V 0(1)…5 V |
| Number of inputs | 1 |
| Sensor | Voltage source Current source 2-wire transmitter (without own power supply) |
| Sensor supply | 17…28 V DC (@ 20 mA) |
| Voltage drop | <1,5 V |
| Voltage drop, current input | <1.5 V |
| Cut-off frequency (-3 dB) | 100 Hz |
| Load impedance current | <300 Ω per channel @ max 23mA |
| load impedance voltage | ≥ 10 kΩ |
| Number of outputs | 2 |
| Output current | configurable 0...20 mA 4...20 mA |
| Output voltage, note | configurable 0(2)...10 V 0(1)...5 V |
| Type | active connected control must be passive |
| Accuracy | <0.05 % of measuring range |
| Configuration | DIP switch |
| Delivery state |
|
| Delivery state | Input: 0...20 mA (loop) // Output 1: 0...20 mA // Output 2: 0...20 mA |
| Galvanic isolation | 3-way isolator |
| Power consumption, max. | 1.2 W |
| Power consumption, typ. | 0.84 W |
| Rail | TS 35 |
| Step response time | ≤ 7 ms |
| Temperature coefficient | ≤ 0.01 % / °C |
| Voltage supply | 24 V DC ±30 % at terminal or via CH20M rail bus |
| EMC standards | IEC 61326-1 NE 21 |
| Galvanic isolation | 3-way isolator |
| Insulation voltage | 2.5 kVeff /1 min. |
| Pollution severity | 2 |
| Rated voltage | 300 Veff |
| Surge voltage category | II |
| Installation location | Device installed in safe area, zone 2 |
| Marking | II 3 G Ex nA IIC T4 Gc |
| Type of connection | Screw connection |
| Tightening torque, min. | 0.4 Nm |
| Tightening torque, max. | 0.6 Nm |
| Clamping range, rated connection | 2.5 mm² |
| Clamping range, min. | 0.5 mm² |
| Clamping range, max. | 2.5 mm² |
| Wire connection cross section AWG, min. | AWG 30 |
| Wire connection cross section AWG, max. | AWG 14 |
| EMC standards | IEC 61326-1 NE 21 |
| Standards | IEC 61010-1 |
| Product information | The configurable DC isolating amplifier ACT20M-AI-AO-S isolates and converts analogue standard signals. An analogue input signal is linearly converted into an analogue output signal and galvanically isolated. The input can also be operated as an active current loop (the loop current is supplied by the device). The power supply is galvanically isolated from the input and output (3-way isolation) by means of direct wiring or the Weidmüller rail bus. The configurable DC isolation amplifier ACT20M-AI-2AO-S offers the same functionality, but has 2 galvanically isolated outputs (4-way isolation). |
| Approval/Certificate/Document of Conformity | [DNV-GL certificate](https://mdcop.weidmueller.com/mediadelivery/asset/900_86299) [FM certificate](https://mdcop.weidmueller.com/mediadelivery/asset/900_102445) [IECEXx certificate](https://mdcop.weidmueller.com/mediadelivery/asset/900_102446) [ATEX certificate](https://mdcop.weidmueller.com/mediadelivery/asset/900_102447) [Declaration of Conformity](https://mdcop.weidmueller.com/mediadelivery/asset/900_35386) |
| Engineering Data | [CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_52198) |
| Engineering Data | [Zuken E3.S](LINK/CAE_EN.html) |
| Eplan Data Portal | [Eplan data](https://dataportal.eplan.com/part-details/WEI.1176020000) |
| CADENAS eCATALOG | [CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=1176020000) |
| WSCAD Universe | [WSCAD data](https://wscaduniverse.com/part-detail?manufacturerId=88&type=0&partNumber=1176020000&norm=0) |
| Software | [DIP switch configuration tool](https://mdcop.weidmueller.com/mediadelivery/asset/900_35389) |
| User Documentation | [Instruction sheet](https://mdcop.weidmueller.com/mediadelivery/asset/900_107103) |
| Catalogues | [Catalogues in PDF-format](LINK/Catalog.html) |
| ETIM 6.0 | EC002653 |
| ETIM 7.0 | EC002653 |
| ETIM 8.0 | EC002653 |
| ETIM 9.0 | EC002653 |
| ECLASS 9.0 | 27-21-01-20 |
| ECLASS 9.1 | 27-21-01-20 |
| ECLASS 10.0 | 27-21-01-20 |
| ECLASS 11.0 | 27-21-01-20 |
| ECLASS 12.0 | 27-21-01-20 |
| ECLASS 13.0 | 27-21-01-20 |
| Long specification | Universal standard signal splitter
Type ACT20M-AI-2AO-S |
| Short specification | Universal standard signal splitter |
Check out any spare parts and components from the Weidmüller catalog!
Do you want to order a 1176020000 ACT20M-AI-2AO-S with code: 1176020000?
Leave your request on our website for immediate assistance!
