PCB plug-in connector, female plug, 3.81 mm, Number of poles: 6, 180°, PUSH IN with actuator, Clamping range, max. : 1.5 mm², Box
| Version | PCB plug-in connector, female plug, 3.81 mm, Number of poles: 6, 180°, PUSH IN with actuator, Clamping range, max. : 1.5 mm², Box |
| Order No. | 1231360000 |
| Type | BCF 3.81/06/180FZE SN BK BX |
| GTIN (EAN) | 4050118014815 |
| Qty. | 50 items |
| Product data | IEC: 320 V / 17.5 A / 0.14 - 1.5 mm²
UL: 300 V / 10 A / AWG 26 - AWG 16 |
| Packaging | Box |
| 34.6 mm |
| Depth (inches) | 1.362 inch |
| Height | 9.3 mm |
| Height (inches) | 0.366 inch |
| Width | 33.25 mm |
| Width (inches) | 1.309 inch |
| Net weight | 5.1 g |
| Product family | OMNIMATE Signal - series BC/SC 3.81 |
| Type of connection | Field connection |
| Wire connection method | PUSH IN with actuator |
| Pitch in mm (P) | 3.81 mm |
| Pitch in inches (P) | 0.15 " |
| Conductor outlet direction | 180° |
| Number of poles | 6 |
| L1 in mm | 19.05 mm |
| L1 in inches | 0.75 " |
| Number of rows | 1 |
| Pin series quantity | 1 |
| Rated cross-section | 1 mm² |
| Touch-safe protection acc. to DIN VDE 57 106 | Safe from finger touch |
| Touch-safe protection acc. to DIN VDE 0470 | IP20 plugged/ IP10 unplugged |
| Protection degree | IP20 |
| Volume resistance | ≤5 mΩ |
| Can be coded | Yes |
| Stripping length | 9 mm |
| Screwdriver blade | 0.4 x 2.5 |
| Screwdriver blade standard | DIN 5264 |
| Plugging cycles | 25 |
| Plugging force/pole, max. | 8 N |
| Pulling force/pole, max. | 7 N |
| Tightening torque | -
- Torque type:
- Screw flange
-
- Usage information:
-
- Tightening torque:
-
- min.:
- 0.15 Nm
-
- max.:
- 0.2 Nm
|
| Insulating material | PA 66 GF 30 |
| Colour | black |
| Colour chart (similar) | RAL 9011 |
| Insulating material group | II |
| Comparative Tracking Index (CTI) | ≥ 550 |
| Insulation strength | ≥ 108 Ω |
| UL 94 flammability rating | V-0 |
| Contact material | Copper alloy |
| Contact surface | tinned |
| Layer structure of plug contact | 4...8 µm Sn matt |
| Storage temperature, min. | -40 °C |
| Storage temperature, max. | 70 °C |
| Operating temperature, min. | -50 °C |
| Operating temperature, max. | 120 °C |
| Temperature range, installation, min. | -25 °C |
| Temperature range, installation, max. | 120 °C |
| Clamping range, min. | 0.14 mm² |
| Clamping range, max. | 1.5 mm² |
| Wire connection cross section AWG, min. | AWG 26 |
| Wire connection cross section AWG, max. | AWG 16 |
| Solid, min. H05(07) V-U | 0.14 mm² |
| Solid, max. H05(07) V-U | 1.5 mm² |
| Flexible, min. H05(07) V-K | 0.14 mm² |
| Flexible, max. H05(07) V-K | 1.5 mm² |
| w. plastic collar ferrule, DIN 46228 pt 4, min. | 0.25 mm² |
| w. plastic collar ferrule, DIN 46228 pt 4, max. | 1 mm² |
| w. wire end ferrule, DIN 46228 pt 1, min. | 0.25 mm² |
| w. wire end ferrule, DIN 46228 pt 1, max. | 1.5 mm² |
| Plug gauge in accordance with EN 60999 a x b; ø | 2.4 mm x 1.5 mm; 1.9mm |
| Clampable conductor | -
- Cross-section for conductor connection:
-
- Type:
- fine-wired
-
- nominal:
- 0.5 mm²
-
- wire end ferrule:
-
- Stripping length:
-
- Recommended wire-end ferrule:
- 9025870000
-
- Stripping length:
-
- Recommended wire-end ferrule:
- 9004050000
-
- Cross-section for conductor connection:
-
- Type:
- fine-wired
-
- nominal:
- 0.75 mm²
-
- wire end ferrule:
-
- Stripping length:
-
- Recommended wire-end ferrule:
- 9025860000
-
- Stripping length:
-
- Recommended wire-end ferrule:
- 0542500000
-
- Cross-section for conductor connection:
-
- Type:
- fine-wired
-
- nominal:
- 1 mm²
-
- wire end ferrule:
-
- Stripping length:
-
- Recommended wire-end ferrule:
- 9019100000
-
- Stripping length:
-
- Recommended wire-end ferrule:
- 0282800000
-
- Cross-section for conductor connection:
-
- Type:
- fine-wired
-
- nominal:
- 0.34 mm²
-
- wire end ferrule:
-
- Stripping length:
-
- Recommended wire-end ferrule:
- 9025770000
|
| Reference text | The outside diameter of the plastic collar should not be larger than the pitch (P)
Length of ferrules is to be chosen depending on the product and the rated voltage. |
| tested acc. to standard | IEC 60664-1
IEC 61984 |
| Rated current, min. number of poles (Tu=20°C) | 17.5 A |
| Rated current, max. number of poles (Tu=20°C) | 17.5 A |
| Rated current, min. number of poles (Tu=40°C) | 17.5 A |
| Rated current, max. number of poles (Tu=40°C) | 16.3 A |
| Rated voltage for surge voltage class / pollution degree II/2 | 320 V |
| Rated voltage for surge voltage class / pollution degree III/2 | 160 V |
| Rated voltage for surge voltage class / pollution degree III/3 | 160 V |
| Rated impulse voltage for surge voltage class/ pollution degree II/2 | 2.5 kV |
| Rated impulse voltage for surge voltage class/ pollution degree III/2 | 2.5 kV |
| Rated impulse voltage for surge voltage class/ contamination degree III/3 | 2.5 kV |
| Short-time withstand current resistance | 3 x 1s with 76 A |
| Rated voltage (Use group B / CSA) | 300 V |
| Rated voltage (Use group C / CSA) | 50 V |
| Rated voltage (Use group D / CSA) | 300 V |
| Rated current (Use group B / CSA) | 11 A |
| Rated current (Use group C / CSA) | 11 A |
| Rated current (Use group D / CSA) | 11 A |
| Wire cross-section, AWG, min. | AWG 26 |
| Wire cross-section, AWG, max. | AWG 16 |
| Institute (cURus) | CURUS |
| Certificate No. (cURus) | E60693 |
| Rated voltage (Use group B / UL 1059) | 300 V |
| Rated voltage (Use group D / UL 1059) | 300 V |
| Rated current (Use group B / UL 1059) | 10 A |
| Rated current (Use group D / UL 1059) | 10 A |
| Wire cross-section, AWG, min. | AWG 26 |
| Wire cross-section, AWG, max. | AWG 16 |
| Reference to approval values | Specifications are maximum values, details - see approval certificate. |
| Packaging | Box |
| VPE length | 164 mm |
| VPE width | 105 mm |
| VPE height | 42 mm |
| Test: Misengagement (Non-interchangeability) | -
- Test:
- visual examination
-
- Evaluation:
- passed
|
| IPC conformity | Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. |
| Notes | - Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
- Rated current related to rated cross-section & min. No. of poles.
- Conductors suitable for connection: 1.5 mm² with wire-end ferrule with plastic collar, DIN 46 228/1, with a rated voltage of 125V/2.5 kV with III/3 or 250 V/2.5 kV with II/2
- Crimp shape A for wire-end ferrules with crimping tools PZ 1,5 (order no. 9005990000) or PZ 6/5 (order no. 9011460000) for larger wire cross-sections recommended.
- Wire end ferrule without plastic collar to DIN 46228/1
- Wire end ferrule with plastic collar to DIN 46228/4
- The test point can only be used as potential-pickup point.
- In accordance with IEC 61984, OMNIMATE-connectors are connectors without breaking capacity (COC). During designated use, connectors are not allowed to be engaged or disengaged when live or under load
- Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
|
Check out any spare parts and components from the Weidmüller catalog!
Do you want to order a 1231360000 BCF 3.81/06/180FZE SN BK BX (50 pcs.) with code: 1231360000?
Leave your request on our website for immediate assistance!
