1351920000 VPU I 1 N-PE 260V/100KA

Code: 1351920000

Surge voltage arrester, Low voltage, without telecomm. contact, Single-phase, TT nur für N-PE

Version	Surge voltage arrester, Low voltage, without telecomm. contact, Single-phase, TT nur für N-PE
Order No.	1351920000
Type	VPU I 1 N-PE 260V/100KA
GTIN (EAN)	4050118158281
Qty.	1 items

Colour	black blue
Design	Installation housing; 2TE Insta IP 20
Operating altitude	≤ 2000 m
Optical function display	No
Protection degree	IP20
Rail	TS 35
Segment	Power distribution
Suitable for	Count-in installation (leakage current free)
UL 94 flammability rating	V-0
Version	without telecomm. contact

Pollution severity	2
Surge voltage category	IV

Discharge current I_max (8/20µs) N-PE	100 kA
Discharge current I_n (8/20µs) N-PE	100 kA
Energy coordination (≤10 m)	Type I Type II Type III
Fuse	Not required
Leakage current at U_n	1 µA
Lightning test current, I_imp (10/350 µs) (N-PE)	100 kA
Low voltage network	Single-phase TT nur für N-PE
Max. continuous voltage, Uc (N-PE)	260 V
Number of poles	1
Protection level U_p at I_N (N-PE)	≤ 1.6 kV
Rated load current I_L	100 A
Rated voltage (AC)	230 V
Requirements category acc. to IEC 61643-11	Type I Type II
Requirements class, acc. to EN 61643-11	T1 T2
Response time	≤ 100 ns
Short-circuit current rating I_SCCR	0.1 kA
Signalling contact	No
Standards	IEC61643-11, EN61643-11
Suitable for	Count-in installation (leakage current free)
Temporary surge voltage (over-voltage) - TOV	1,200 V
Voltage type	AC

Stripping length	15 mm
Type of connection	Screw connection
Stripping length, rated connection	15 mm
Tightening torque, min.	2 Nm
Tightening torque, max.	3 Nm
Clamping range, rated connection	16 mm²
Clamping range, min.	4 mm²
Clamping range, max.	35 mm²
Wire cross-section, solid, min.	2.5 mm²
Wire cross-section, solid, max.	16 mm²
Wire connection cross section, finely stranded, min.	2.5 mm²
Wire connection cross section, finely stranded, max.	25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.	2.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.	50 mm²
Connection cross-section, stranded, min.	2.5 mm²
Connection cross-section, stranded, max.	50 mm²

Approval/Certificate/Document of Conformity	[EU_Konformitätserklärung / EU_Declaration_of_Conformity](https://mdcop.weidmueller.com/mediadelivery/asset/900_86294)
Engineering Data	[CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_61335)
Eplan Data Portal	[Eplan data](https://dataportal.eplan.com/part-details/WEI.1351920000)
CADENAS eCATALOG	[CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=1351920000)
WSCAD Universe	[WSCAD data](https://wscaduniverse.com/part-detail?manufacturerId=88&type=0&partNumber=1351920000&norm=0)
Catalogues	[Catalogues in PDF-format](LINK/Catalog.html)

Long specification	Pluggable Class I arrestor made from V0 material for LPL I/II/III/IV with 100 kA, suitable for TN-S, IT or TT mains systems for protection between N and PE. Protection level < 2 kV. Type: Weidmüller VPU I 1 N-PE 260 V/100 kA Order No. 1351920000 or equivalent
Short specification	Class I arrester for LPL I/II/III/IV with 100 kA suitable for TN-S, IT or TT mains systems for protection between N and PE. Protection level < 2 kV. Type: Weidmüller VPU I 1 N-PE 260 V/100 kA Order no. 1351920000 or equivalent