1469610000 PRO ECO 480W 48V 10A
Brand: Weidmüller
Code: 1469610000
Power supply, switch-mode power supply unit, 48 V
| Version | Power supply, switch-mode power supply unit, 48 V |
| Order No. | 1469610000 |
| Type | PRO ECO 480W 48V 10A |
| GTIN (EAN) | 4050118275490 |
| Qty. | 1 items |
| 120 mm | |
| Depth (inches) | 4.724 inch |
| Height | 125 mm |
| Height (inches) | 4.921 inch |
| Width | 100 mm |
| Width (inches) | 3.937 inch |
| Net weight | 1,561 g |
| Storage temperature | -40 °C...85 °C |
| Operating temperature | -25 °C...70 °C |
| REACH SVHC | Lead 7439-92-1 |
| SCIP | 6d8cdf22-8230-4af8-86c8-3558c716666d |
| AC current consumption | 2.4 A @ 230 V AC / 5.2 A @ 110 V AC |
| AC input voltage range | 85...264 V AC (derating at 100 V AC) |
| Connection system | Screw connection |
| DC current consumption | 1.5 A @ 370 V DC / 4.6 A @ 120 V DC |
| DC input voltage range | 80...370 V DC (Derating @ 120 V DC) |
| Frequency range AC | 47...63 Hz |
| Input frequency | 47...63 Hz |
| Input fuse (internal) | Yes |
| Inrush current | max. 3 A |
| Nominal power consumption | 516.1 VA |
| Rated input voltage | 100...240 V AC |
| Recommended back-up fuse | 6 A / DI, safety fuse 16 A, Char. B, circuit breaker 6…8 A, Char. C, circuit breaker |
| Surge protection | Varistor |
| Capacitive load | unrestricted |
| Connection system | Screw connection |
| Continous output current @ UNominal | 10 A @ 55 °C 2.5 A @ 70 °C |
| Nominal output current for Unom | 10 A @ 55 °C |
| Output power | 480 W |
| Output voltage, max. | 56 V |
| Output voltage, min. | 42 V |
| Output voltage, note | (adjustable via potentiometer) |
| Overload protection | Yes |
| Parallel connection option | yes, max. 3 |
| Protection against inverse voltage | Yes |
| Ramp-up time | ≤ 100 ms |
| Rated output voltage | 48 V DC ± 1 % |
| Residual ripple, breaking spikes | < 100 mV ss @ 48 V DC, I Nenn |
| AC failure bridging time @ Inom | > 20 ms @ 230 V AC / > 20 ms @ 115 V AC |
| Degree of efficiency | 93% |
| Earth leakage current, max. | 3.5 mA |
| Housing version | Metal, corrosion resistant |
| Indication | Green LED (Uoutput > 21.6 V DC) Yellow LED (loutput > 90 % IRated typ. ) red LED (overload, overtemperature, short-circuit, Uoutput < 20.4 V DC) |
| Max. perm. air humidity (operational) | 5 %…95 % RH |
| Mounting position, installation notice | on terminal rail TS 35 |
| MTBF |
|
| Power factor (approx.) | > 0.98…230 V AC / > 0.98…115 V AC |
| Power loss, idling | 5 W |
| Power loss, nominal load | 50 W |
| Protection against over-heating | Yes |
| Protection against reverse voltages from the load | 58…65 V DC |
| Protection degree | IP20 |
| Short-circuit protection | Yes |
| Surge voltage category | II |
| Interference immunity test acc. to | EN 61000-4-2 (ESD) EN 61000-4-3 (RS) EN 61000-4-4 (burst) EN 61000-4-5 (surge) EN 61000-4-6 (conducted) EN61000-4-8 (Fields) EN61000-4-11 (Dips) |
| Limiting of mains voltage harmonic currents | According to EN 61000-3-2 |
| Noise emission in accordance with EN55032 | Class B |
| Shock resistance IEC 60068-2-27 | 15 g In all directions |
| Vibration resistance IEC 60068-2-6 | 1 g according to EN 50178 |
| Insulation voltage input / earth | 2 kV |
| Insulation voltage output / earth | 0.5 kV |
| Insulation voltage, input/output | 3 kV |
| Pollution severity | 2 |
| Protection class | I, with PE connection |
| Surge voltage category | II |
| Electrical machine equipment | Acc. to EN60204 |
| For use with electronic equipment | Acc. to EN50178 / VDE0160 |
| Protection against dangerous shock currents | Acc. to VDE0106-101 |
| Protective separation / protection against electrical shock | VDE0100-410 / acc. to DIN57100-410 |
| Safety extra-low voltage | SELV acc. to IEC 60950-1 PELV according to EN 60204-1 |
| Safety transformers for switch-mode power supplies | According to EN 61558-2-16 |
| Conductor cross-section, AWG/kcmil , max. | 12 |
| Conductor cross-section, AWG/kcmil , min. | 26 |
| Conductor cross-section, flexible , min. | 0.5 mm² |
| Conductor cross-section, rigid , max. | 6 mm² |
| Conductor cross-section, rigid , min. | 0.5 mm² |
| Connection system | Screw connection |
| Wire connection cross section, flexible (input), max. | 2.5 mm² |
| Conductor cross-section, AWG/kcmil , max. | 10 |
| Conductor cross-section, AWG/kcmil , min. | 26 |
| Conductor cross-section, flexible , max. | 4 mm² |
| Conductor cross-section, flexible , min. | 0.22 mm² |
| Conductor cross-section, rigid , max. | 6 mm² |
| Conductor cross-section, rigid , min. | 0.5 mm² |
| Connection system | Screw connection |
| Number of terminals | 7 (++,---,13,14) |
| Contact load (NO contact) | max. 30 V DC / 1 A |
| Floating contact | Yes |
| Relay on/off | Output voltage >21.6 V DC/ <20.4 V DC, overload |
| Certificate no. (cULus) | E258476 |
| Institute (cULus) | CULUS |
| Approval/Certificate/Document of Conformity | [UL508 CSA C22.2 Certificate.pdf](https://mdcop.weidmueller.com/mediadelivery/asset/900_306081) [Declaration of Conformity](https://mdcop.weidmueller.com/mediadelivery/asset/900_35495) [UK Conformity Assessed](https://mdcop.weidmueller.com/mediadelivery/asset/900_314089) |
| Engineering Data | [CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_89467) |
| Eplan Data Portal | [Eplan data](https://dataportal.eplan.com/part-details/WEI.1469610000) |
| CADENAS eCATALOG | [CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=1469610000) |
| WSCAD Universe | [WSCAD data](https://wscaduniverse.com/part-detail?manufacturerId=88&type=0&partNumber=1469610000&norm=0) |
| User Documentation | [Operating instructions](https://mdcop.weidmueller.com/mediadelivery/asset/900_68813) |
| Catalogues | [Catalogues in PDF-format](LINK/Catalog.html) |
Check out any spare parts and components from the Weidmüller catalog!
Do you want to order a 1469610000 PRO ECO 480W 48V 10A with code: 1469610000?
Leave your request on our website for immediate assistance!
