1477420000 ACT20P-AI-AO-DC-S

Code: 1477420000

Signal converter/insulator, Input : I/U universal, Output : I/U universal, Signal converter/isolator, 24 V DC power supply

General ordering data

Version	Signal converter/insulator, Input : I/U universal, Output : I/U universal, Signal converter/isolator, 24 V DC power supply
Order No.	1477420000
Type	ACT20P-AI-AO-DC-S
GTIN (EAN)	4050118284959
Qty.	1 items

Dimensions and weights

	113.7 mm
Depth (inches)	4.476 inch
Height	119.2 mm
Height (inches)	4.693 inch
Width	12.5 mm
Width (inches)	0.492 inch
Net weight	167 g

Temperatures

Storage temperature	-25 °C...70 °C
Operating temperature	-25 °C...70 °C
Humidity at operating temperature	0...95 % (no condensation)
Humidity	10…90 %, no condensation

Probability of failure

SIL in compliance with IEC 61508

None

Environmental Product Compliance

REACH SVHC	Lead 7439-92-1
SCIP	2f6dd957-421a-46db-a0c2-cf1609156924

Input

Input current	configurable 0-22 mA (min. measurement range 4 mA)
Input resistance, current	100 Ω
Input resistance, voltage	≥ 1 MΩ
Input voltage	configurable 0-11 V (min. measurement range 2 V)
Number of inputs	1
Resolution	3.5 µA / 1.76 mV per bit
Sensor supply	24 V DC

Output

Load impedance current	1 kΩ @ 20 mA
load impedance voltage	> 600 Ω @ 10 V
Number of outputs	1
Offset voltage	≤ 20 mV
Output current	Adjustable 0...22 mA Output range, min, 4 mA
Output voltage, note	Adjustable 0...11 V Output range, min, 2 V
Type	active connected control must be passive

Output (digital)

Max. switching voltage, AC

0 V

Output (analogue)

Output current

Adjustable
0...22 mA
Output range, min, 4 mA

General data

Configuration	DIP switch Keys and LED display with reference voltage/current sources
Galvanic isolation	3-way isolator between input ⁄ output ⁄ supply
Linearity	<± 0.1 % of signal range Typ. ± 0.05 % of signal range
Power consumption, typ.	3 W
Rail	TS 35
Step response time	350 ms
Temperature coefficient	<0.05 % / °C
Voltage supply	12...60 V DC

Insulation coordination

EMC standards	IEC 61326-1
Galvanic isolation	3-way isolator between input ⁄ output ⁄ supply
Impulse withstand voltage	4 kV (1.2/50 µs)
Insulation voltage	2 kV inputs / outputs
Pollution severity	2
Surge voltage category	III

Connection data

Type of connection	Screw connection
Tightening torque, min.	0.4 Nm
Tightening torque, max.	0.6 Nm
Clamping range, rated connection	1.5 mm²
Clamping range, min.	0.5 mm²
Clamping range, max.	2.5 mm²
Wire connection cross section AWG, min.	AWG 26
Wire connection cross section AWG, max.	AWG 12

Important note

Product information

The universally configurable DC isolating amplifier ACT20P-AI-AO-DC/AC-x isolates and converts analogue signals.
An analogue input signal (current or voltage) is linearly converted into an analogue output signal (current or voltage) and galvanically isolated.
The power supply is galvanically isolated from input and output (3-way isolation).

Features

Universally configurable via DIP switches and operating buttons
Active or passive signal input
Front LED indicates operation status
3-way galvanic isolation between input, output and power supply

Downloads

Approval/Certificate/Document of Conformity	[Application notes -- UL Certification](https://mdcop.weidmueller.com/mediadelivery/asset/900_103117) [Declaration of Conformity](https://mdcop.weidmueller.com/mediadelivery/asset/900_37674)
Engineering Data	[CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_211764)
CADENAS eCATALOG	[CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=1477420000)
Software	[DIP switch configuration tool](https://mdcop.weidmueller.com/mediadelivery/asset/900_35389)
User Documentation	[Instruction sheet](https://mdcop.weidmueller.com/mediadelivery/asset/900_35743)
Catalogues	[Catalogues in PDF-format](LINK/Catalog.html)

Classifications

ETIM 6.0	EC002653
ETIM 7.0	EC002653
ETIM 8.0	EC002653
ETIM 9.0	EC002653
ECLASS 9.0	27-21-01-20
ECLASS 9.1	27-21-01-20
ECLASS 10.0	27-21-01-20
ECLASS 11.0	27-21-01-20
ECLASS 12.0	27-21-01-20
ECLASS 13.0	27-21-01-20