2619200000 VPU AC I 4 R 440/25 LCF

Code: 2619200000

Surge voltage arrester, Low voltage, Surge protection, with remote contact, TN-C-S, TN-S

Version	Surge voltage arrester, Low voltage, Surge protection, with remote contact, TN-C-S, TN-S
Order No.	2619200000
Type	VPU AC I 4 R 440/25 LCF
GTIN (EAN)	4050118634631
Qty.	1 items

MTBF

15 a

Connection type	Screw connection pluggable
Cross-section for connected wire, solid core, max.	1.5 mm²
Cross-section for connected wire, solid core, min.	0.14 mm²
Stripping length	8 mm

Colour	black
Design	Installation housing; 8 TE Insta IP 20
Operating altitude	≤ 2000 m
Optical function display	green = OK; red = arrester is defective - replace
Protection degree	IP20 in installed state
Rail	TS 35
Segment	Power distribution
Suitable for	Count-in installation (leakage current free)
UL 94 flammability rating	V-0
Version	Surge protection with remote contact

Pollution severity	2
Surge voltage category	III

Discharge current I_max (8/20µs) wire-PE	100 kA
Discharge current I_n (8/20µs) wire-PE	25 kA
Energy coordination (≤10 m)	Type I Type II Type III
Follow-on current extinguishing capability I_fi	Not available due for technical reasons
Frequency range, max.	60 Hz
Frequency range, min.	50 Hz
Fuse	250 A gL (if back up fuse > 250 A)
Leakage current at U_n	5 µA
Lightning test current I_imp(10/350 µs) (L-PE)	25 kA
Low voltage network	TN-C-S TN-S
Mains voltage	400 V / 690 V
Max. continuous voltage, Uc (AC)	440 V
Number of poles	4
Protection level U_p at I_N (L/N-PE)	≤ 2.5 kV
Rated load current I_L	100 A
Rated voltage (AC)	400 V
Requirements category acc. to IEC 61643-11	Type I Type II
Requirements class, acc. to EN 61643-11	T1 T2
Response time	≤ 25 ns
Short-circuit current rating I_SCCR	50 kA
Signalling contact	250 V 1A 1CO
Standards	IEC61643-11, EN61643-11
Suitable for	Count-in installation (leakage current free)
Temporary surge voltage (over-voltage) - TOV	762 V
Voltage type	AC

Stripping length	13 mm
Wire connection method	Screw connection
Type of connection	Screw connection
Stripping length, rated connection	13 mm
Tightening torque, min.	2 Nm
Tightening torque, max.	3 Nm
Clamping range, rated connection	16 mm²
Clamping range, min.	6 mm²
Clamping range, max.	35 mm²
Wire cross-section, solid, min.	6 mm²
Wire cross-section, solid, max.	35 mm²
Wire connection cross section, finely stranded, min.	6 mm²
Wire connection cross section, finely stranded, max.	35 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.	6 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.	35 mm²
Connection cross-section, stranded, min.	6 mm²
Connection cross-section, stranded, max.	35 mm²

Time interval

5 years

Product information	For use in DC applications, please use the fuse of SIBA Type NH2XL aR/aSF DC 1500 V
Notes	Only applicable to IT power systems where the earth on the distribution transformer is interconnected with the earth on the consumer side (RE=RA in Figure 44.A1 of IEC 60364-4-44:2018).

Approval/Certificate/Document of Conformity	[EU_Konformitätserklärung / EU_Declaration_of_Conformity](https://mdcop.weidmueller.com/mediadelivery/asset/900_86298)
Engineering Data	[CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_81591)
Eplan Data Portal	[Eplan data](https://dataportal.eplan.com/part-details/WEI.2619200000)
CADENAS eCATALOG	[CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=2619200000)
Catalogues	[Catalogues in PDF-format](LINK/Catalog.html)