2619390000 ACT20P-CI-2CO-OLP-P

Code: 2619390000

Signal converter/insulator, Input : 4-20 mA, Output : 2 x 4-20 mA, (loop powered), Signal distributor, Output current loop powered

General ordering data

Version	Signal converter/insulator, Input : 4-20 mA, Output : 2 x 4-20 mA, (loop powered), Signal distributor, Output current loop powered
Order No.	2619390000
Type	ACT20P-CI-2CO-OLP-P
GTIN (EAN)	4050118622904
Qty.	1 items

Dimensions and weights

	114 mm
Depth (inches)	4.488 inch
Height	127.1 mm
Height (inches)	5.004 inch
Width	12.5 mm
Width (inches)	0.492 inch
Net weight	140 g

Temperatures

Storage temperature	-40 °C...85 °C
Operating temperature	-20 °C...60 °C
Humidity	5...95 %, no condensation

Environmental Product Compliance

REACH SVHC	Lead 7439-92-1
SCIP	2f6dd957-421a-46db-a0c2-cf1609156924

Input

Input current	4…20mA
Number of inputs	1
Sensor	4- wire sensor (with own power supply)
Voltage drop, current input	<3 V

Output

Load impedance current	R_L = (U_B-12 V) / 20 ± 20mA, e.g. 600 Ω at 24 V
Output current	4...20 mA, loop-powered
Type	passive connected control must be active

Output (analogue)

Output current

4...20 mA, loop-powered

General data

Accuracy	<0.1 % of end value
Configuration	none
Rail	TS 35
Step response time	≤ 2 ms
Voltage supply	via output current loop min. 12 V DC/ max. 30 V DC

Insulation coordination

EMC standards	EN 61010-1:2011 UL 61010-1 IEC61000-6-2 IEC 61000-6-4
Impulse withstand voltage	4 kV (1.2/50 µs)
Insulation voltage	2 kV (Input /Output), 1 min, 50 Hz
Rated voltage	300 V
Surge voltage category	III

Data for Ex applications (ATEX)

Marking

II 3 G Ex ec IIC T6 Gc

Connection data

Type of connection	PUSH IN
Tightening torque, min.	0.4 Nm
Tightening torque, max.	0.6 Nm
Clamping range, rated connection	2.5 mm²
Clamping range, min.	0.5 mm²
Clamping range, max.	2.5 mm²
Wire connection cross section AWG, min.	AWG 26
Wire connection cross section AWG, max.	AWG 14
Wire cross-section, solid, min.	0.5 mm²
Wire cross-section, solid, max.	2.5 mm²
Wire connection cross section, finely stranded, min.	0.5 mm²
Wire connection cross section, finely stranded, max.	2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.	0.2 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.	2.5 mm²

Important note

Product information

The ACT20P-CI-2CO-OLP-S fixed passive isolator isolates analogue standard current source signals. An analogue input current signal is converted linearly and doubled to provide two galvanically separated output current signals. The device is powered via the output current loop.

Features

3-way galvanic isolation between input, output 1 and output 2.

Downloads

Approval/Certificate/Document of Conformity	[ATEX Certification](https://mdcop.weidmueller.com/mediadelivery/asset/900_103115) [IECEx Certification](https://mdcop.weidmueller.com/mediadelivery/asset/900_103116) [UL Certification (hazardous location)](https://mdcop.weidmueller.com/mediadelivery/asset/900_178189) [UL Certification (US-CAN)](https://mdcop.weidmueller.com/mediadelivery/asset/900_178190) [Declaration of Conformity](https://mdcop.weidmueller.com/mediadelivery/asset/900_158018)
Engineering Data	[CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_178103)
CADENAS eCATALOG	[CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=2619390000)
User Documentation	[Instruction sheet](https://mdcop.weidmueller.com/mediadelivery/asset/900_158013)
Catalogues	[Catalogues in PDF-format](LINK/Catalog.html)

Classifications

ETIM 6.0	EC002653
ETIM 7.0	EC002653
ETIM 8.0	EC002653
ETIM 9.0	EC002653
ECLASS 9.0	27-21-01-20
ECLASS 9.1	27-21-01-20
ECLASS 10.0	27-21-01-20
ECLASS 11.0	27-21-01-20
ECLASS 12.0	27-21-01-20
ECLASS 13.0	27-21-01-20