2827610000 VPU AC II F 4 300/40

Code: 2827610000

Surge voltage arrester, Low voltage, Class II surge protection, no leakage current, TN-S

Version	Surge voltage arrester, Low voltage, Class II surge protection, no leakage current, TN-S
Order No.	2827610000
Type	VPU AC II F 4 300/40
GTIN (EAN)	4064675366607
Qty.	1 items

Colour	orange black
Design	Installation housing; 1TE Insta IP 20
Operating altitude	≤ 4000 m
Optical function display	green = OK; red = arrester is defective - replace
Protection degree	IP20 in installed state
Rail	TS 35
Segment	Power distribution
UL 94 flammability rating	V-0
Version	Class II surge protection, no leakage current

Pollution severity	2
Surge voltage category	III

Combined pulse U_OC	6 kV
Discharge current I_max (8/20µs) wire-PE	40 kA
Discharge current I_n (8/20µs) wire-PE	20 kA
Energy coordination (≤10 m)	Type II Type III
Follow-on current extinguishing capability I_fi	Follow current need not be taken into account
Frequency range, max.	60 Hz
Frequency range, min.	50 Hz
Fuse	Not required internally available
Leakage current at U_n	0.6 mA
Low voltage network	TN-S
Mains voltage	230 V / 400 V
Max. continuous voltage, Uc (AC)	300 V
Number of poles	1
Protection level U_p at I_N (L/N-PE)	≤ 1.5 kV
Rated voltage (AC)	230 V
Requirements category acc. to IEC 61643-11	Type II/III
Requirements class, acc. to EN 61643-11	T2 T3
Response time	≤ 25 ns
Short-circuit current rating I_SCCR	100 kA
SPD type	T2 T3
Standards	IEC61643-11, EN61643-11
Temporary surge voltage (over-voltage) - TOV	337 V
Voltage type	AC

Stripping length	15 mm
Wire connection method	Screw connection
Type of connection	Screw connection
Stripping length, rated connection	18 mm
Tightening torque, min.	2 Nm
Tightening torque, max.	4.5 Nm
Clamping range, rated connection	16 mm²
Clamping range, min.	4 mm²
Clamping range, max.	35 mm²
Wire cross-section, solid, min.	2.5 mm²
Wire cross-section, solid, max.	35 mm²
Wire connection cross section, finely stranded, min.	4 mm²
Wire connection cross section, finely stranded, max.	35 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.	2.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.	25 mm²
Connection cross-section, stranded, min.	2.5 mm²
Connection cross-section, stranded, max.	25 mm²

Time interval

5 years

Product information

If F1 > 63A gG, then the integrated backup fuse always operates before F1

Approval/Certificate/Document of Conformity	[EU_Konformitätserklärung / EU_Declaration_of_Conformity](https://mdcop.weidmueller.com/mediadelivery/asset/900_225547)
Engineering Data	[CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_213482)
Eplan Data Portal	[Eplan data](https://dataportal.eplan.com/part-details/WEI.2827610000)
CADENAS eCATALOG	[CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=2827610000)
User Documentation	[Beipackzettel / Instruction Sheet](https://mdcop.weidmueller.com/mediadelivery/asset/900_294557)
Catalogues	[Catalogues in PDF-format](LINK/Catalog.html)