Printed circuit board terminals, 5.00 mm, Number of poles: 3, 90°, Solder pin length (l): 3.5 mm, tinned, orange, coloured, PUSH IN with actuator, Clamping range, max. : 2.5 mm², Box
| Version | Printed circuit board terminals, 5.00 mm, Number of poles: 3, 90°, Solder pin length (l): 3.5 mm, tinned, orange, coloured, PUSH IN with actuator, Clamping range, max. : 2.5 mm², Box |
| Order No. | 2873480000 |
| Type | LMF APL 5.00/03/90 3.5SN BX |
| GTIN (EAN) | 4064675644514 |
| Qty. | 90 items |
| Product data | IEC: 400 V / 24 A / 0.5 - 2.5 mm²
UL: 300 V / 20 A / AWG 24 - AWG 12 |
| Packaging | Box |
| 19.2 mm |
| Depth (inches) | 0.756 inch |
| Height | 18.3 mm |
| Height (inches) | 0.72 inch |
| Height of lowest version | 14.8 mm |
| Width | 17.7 mm |
| Width (inches) | 0.697 inch |
| Net weight | 4.638 g |
| Mounting onto the PCB | THT solder connection |
| Number of poles | 3 |
| Number of solder pins per pole | 2 |
| Pitch in inches (P) | 0.197 " |
| Pitch in mm (P) | 5 mm |
| Product family | OMNIMATE Signal - series LMF |
| Protection degree | IP20 |
| Side termination, characteristic | closed side |
| Solder eyelet hole diameter (D) | 1.1 mm |
| Solder eyelet hole diameter tolerance (D) | + 0,1 mm |
| Solder pin dimensions | d = 0.8 mm
0.6 x 0.8 mm |
| Solder pin length (l) | 3.5 mm |
| Soldering process | Manual soldering
Wave soldering |
| Tolerance of solder pin position | ± 0.1 mm |
| Insulating material | Wemid (PA) |
| Colour | orange
coloured |
| Colour chart (similar) | RAL 2000
- |
| Comparative Tracking Index (CTI) | ≥ 600 |
| UL 94 flammability rating | V-0 |
| Contact material | Cu-alloy |
| Contact surface | tinned |
| Coating | 4-6 μm SN |
| Tinning type | matt |
| Layer structure of solder connection | 4...6 µm Sn matt |
| Storage temperature, min. | -40 °C |
| Storage temperature, max. | 70 °C |
| Operating temperature, min. | -50 °C |
| Operating temperature, max. | 120 °C |
| Packaging | Box |
| VPE length | 349 mm |
| VPE width | 140 mm |
| VPE height | 33 mm |
| Test: Durability of markings | -
- Test:
- mark of origin, type identification, pitch, approval marking UL, durability
-
- Evaluation:
- available
|
| Test: Clampable cross section | -
- Standard:
- DIN EN 60999-1 section 9.5 / 12.00, DIN EN 60947-1 section 8.2.4.5.1 / 12.02
-
- Conductor type:
-
- Type of conductor and conductor cross-section:
- solid 0.14 mm²
-
- Type of conductor and conductor cross-section:
- stranded 0.14 mm²
-
- Type of conductor and conductor cross-section:
- solid 1.5 mm²
-
- Type of conductor and conductor cross-section:
- stranded 1.5 mm²
-
- Type of conductor and conductor cross-section:
- AWG 24/1
-
- Type of conductor and conductor cross-section:
- AWG 24/19
-
- Type of conductor and conductor cross-section:
- AWG 16/1
-
- Type of conductor and conductor cross-section:
- AWG 16/19
-
- Evaluation:
- passed
|
| Test for damage to and accidental loosening of conductors | -
- Standard:
- DIN EN 60999-1 section 9.5 / 12.00
-
- Requirement:
- 0.2 kg
-
- Conductor type:
-
- Type of conductor and conductor cross-section:
- AWG 24/1
-
- Type of conductor and conductor cross-section:
- AWG 24/19
-
- Evaluation:
- passed
-
- Requirement:
- 0.3 kg
-
- Conductor type:
-
- Type of conductor and conductor cross-section:
- stranded 0.25 mm²
-
- Type of conductor and conductor cross-section:
- H05V-K0.5
-
- Evaluation:
- passed
-
- Requirement:
- 0.4 kg
-
- Conductor type:
-
- Type of conductor and conductor cross-section:
- H07V-U1.5
-
- Type of conductor and conductor cross-section:
- H07V-K1.5
-
- Type of conductor and conductor cross-section:
- AWG 16/1
-
- Type of conductor and conductor cross-section:
- AWG 16/19
-
- Evaluation:
- passed
|
| Pull-out test | -
- Standard:
- DIN EN 60999-1 section 9.5 / 12.00
-
- Requirement:
- 0.2 kg
-
- Conductor type:
-
- Type of conductor and conductor cross-section:
- AWG 24/1
-
- Type of conductor and conductor cross-section:
- AWG 24/19
-
- Evaluation:
- passed
-
- Requirement:
- 0.3 kg
-
- Conductor type:
-
- Type of conductor and conductor cross-section:
- stranded 0.25 mm²
-
- Type of conductor and conductor cross-section:
- H05V-K0.5
-
- Evaluation:
- passed
-
- Requirement:
- 0.4 kg
-
- Conductor type:
-
- Type of conductor and conductor cross-section:
- H07V-U1.5
-
- Type of conductor and conductor cross-section:
- H07V-K1.5
-
- Type of conductor and conductor cross-section:
- AWG 16/1
-
- Type of conductor and conductor cross-section:
- AWG 16/19
-
- Evaluation:
- passed
|
| IPC conformity | Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. |
| Notes | - Additional variants on request
- Rated current related to rated cross-section & min. No. of poles.
- Wire end ferrule without plastic collar to DIN 46228/1
- Wire end ferrule with plastic collar to DIN 46228/4
- Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
- The test point can only be used as potential-pickup point.
- Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
|
| Engineering Data | [CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_301672) |
| Catalogues | [Catalogues in PDF-format](LINK/Catalog.html) |
| ETIM 6.0 | EC002643 |
| ETIM 7.0 | EC002643 |
| ETIM 8.0 | EC002643 |
| ETIM 9.0 | EC002643 |
| ECLASS 9.0 | 27-44-04-01 |
| ECLASS 9.1 | 27-44-04-01 |
| ECLASS 10.0 | 27-44-04-01 |
| ECLASS 11.0 | 27-46-01-01 |
| ECLASS 12.0 | 27-46-01-01 |
| ECLASS 13.0 | 27-46-01-01 |
| Approvals |  |
| UL File Number Search | [UL Website](LINK/UL_search.html) |
| Certificate No. (cURus) | E60693 |
