Printed circuit board terminals, 5.08 mm, Number of poles: 3, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 2.5 mm², Box
| Version | Printed circuit board terminals, 5.08 mm, Number of poles: 3, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 2.5 mm², Box |
| Order No. | 2873490000 |
| Type | LM APL 5.08/03/135 3.5SN OR BX |
| GTIN (EAN) | 4064675644521 |
| Qty. | 500 items |
| Product data | IEC: 630 V / 17.5 A / 0.2 - 2.5 mm²
UL: 300 V / 15 A / AWG 24 - AWG 14 |
| Packaging | Box |
| 13.9 mm |
| Depth (inches) | 0.547 inch |
| Height | 19 mm |
| Height (inches) | 0.748 inch |
| Height of lowest version | 15.5 mm |
| Width | 15.79 mm |
| Width (inches) | 0.622 inch |
| Net weight | 3.804 g |
| Mounting onto the PCB | THT solder connection |
| Number of poles | 3 |
| Number of solder pins per pole | 1 |
| Pitch in inches (P) | 0.2 " |
| Pitch in mm (P) | 5.08 mm |
| Product family | OMNIMATE Signal - series LM |
| Protection degree | IP20 |
| Side termination, characteristic | closed side |
| Solder eyelet hole diameter (D) | 1.3 mm |
| Solder eyelet hole diameter tolerance (D) | + 0,1 mm |
| Solder pin dimensions | 0.95 x 0.8 mm |
| Solder pin length (l) | 3.5 mm |
| Soldering process | Manual soldering
Wave soldering |
| Tolerance of solder pin position | ± 0.1 mm |
| Volume resistance | 1.20 mΩ |
| Insulating material | Wemid (PA) |
| Colour | orange |
| Colour chart (similar) | RAL 2000 |
| Insulating material group | I |
| Comparative Tracking Index (CTI) | ≥ 600 |
| UL 94 flammability rating | V-0 |
| Contact material | Cu-alloy |
| Contact surface | tinned |
| Coating | 1-3 μm Ni
4-6 μm SN |
| Tinning type | matt |
| Layer structure of solder connection | 1...3 µm Ni / 4...6 µm Sn matt |
| Storage temperature, min. | -40 °C |
| Storage temperature, max. | 70 °C |
| Operating temperature, min. | -50 °C |
| Operating temperature, max. | 120 °C |
| Packaging | Box |
| VPE length | 491 mm |
| VPE width | 341 mm |
| VPE height | 164 mm |
| Test: Durability of markings | -
- Test:
- mark of origin, type identification, pitch, type of material, approval marking UL, approval marking CSA, durability
-
- Evaluation:
- available
|
| Test: Clampable cross section | -
- Standard:
- DIN EN 60999-1 section 9.5 / 12.00, DIN EN 60947-1 section 8.2.4.5.1 / 12.02
-
- Conductor type:
-
- Type of conductor and conductor cross-section:
- solid 0.2 mm²
-
- Type of conductor and conductor cross-section:
- stranded 0.2 mm²
-
- Type of conductor and conductor cross-section:
- stranded 1.5 mm²
-
- Type of conductor and conductor cross-section:
- solid 2.5 mm²
-
- Type of conductor and conductor cross-section:
- AWG 24/1
-
- Type of conductor and conductor cross-section:
- AWG 24/19
-
- Type of conductor and conductor cross-section:
- AWG 14/1
-
- Type of conductor and conductor cross-section:
- AWG 14/19
-
- Evaluation:
- passed
|
| Test for damage to and accidental loosening of conductors | -
- Standard:
- DIN EN 60999-1 section 9.5 / 12.00
-
- Requirement:
- 0.2 kg
-
- Conductor type:
-
- Type of conductor and conductor cross-section:
- stranded 0.25 mm²
-
- Type of conductor and conductor cross-section:
- AWG 24/1
-
- Type of conductor and conductor cross-section:
- AWG 24/19
-
- Evaluation:
- passed
-
- Requirement:
- 0.3 kg
-
- Conductor type:
-
- Type of conductor and conductor cross-section:
- H05V-U0.5
-
- Evaluation:
- passed
-
- Requirement:
- 0.4 kg
-
- Conductor type:
-
- Type of conductor and conductor cross-section:
- H07V-K1.5
-
- Evaluation:
- passed
-
- Requirement:
- 0.7 kg
-
- Conductor type:
-
- Type of conductor and conductor cross-section:
- H07V-U2.5
-
- Type of conductor and conductor cross-section:
- AWG 14/1
-
- Type of conductor and conductor cross-section:
- AWG 14/19
-
- Evaluation:
- passed
|
| Pull-out test | -
- Standard:
- DIN EN 60999-1 section 9.5 / 12.00
-
- Requirement:
- 0.2 kg
-
- Conductor type:
-
- Type of conductor and conductor cross-section:
- stranded 0.25 mm²
-
- Type of conductor and conductor cross-section:
- AWG 24/1
-
- Type of conductor and conductor cross-section:
- AWG 24/19
-
- Evaluation:
- passed
-
- Requirement:
- 0.3 kg
-
- Conductor type:
-
- Type of conductor and conductor cross-section:
- H05V-U0.5
-
- Evaluation:
- passed
-
- Requirement:
- 0.4 kg
-
- Conductor type:
-
- Type of conductor and conductor cross-section:
- H07V-K1.5
-
- Evaluation:
- passed
-
- Requirement:
- 0.7 kg
-
- Conductor type:
-
- Type of conductor and conductor cross-section:
- H07V-U2.5
-
- Type of conductor and conductor cross-section:
- AWG 14/1
-
- Type of conductor and conductor cross-section:
- AWG 14/19
-
- Evaluation:
- passed
|
| IPC conformity | Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. |
| Notes | - Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
|
| Engineering Data | [CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_300932) |
| Catalogues | [Catalogues in PDF-format](LINK/Catalog.html) |
| ETIM 6.0 | EC002643 |
| ETIM 7.0 | EC002643 |
| ETIM 8.0 | EC002643 |
| ETIM 9.0 | EC002643 |
| ECLASS 9.0 | 27-44-04-01 |
| ECLASS 9.1 | 27-44-04-01 |
| ECLASS 10.0 | 27-44-04-01 |
| ECLASS 11.0 | 27-46-01-01 |
| ECLASS 12.0 | 27-46-01-01 |
| ECLASS 13.0 | 27-46-01-01 |
| Approvals |  |
| ROHS | Conform |
| UL File Number Search | [UL Website](LINK/UL_search.html) |
| Certificate No. (cURus) | E60693 |
