8000050554 FP SOL TOP3 24/10 2 001
Brand: Weidmüller
Code: 8000050554
FieldPower® power supply unit, IP65, 3 x 4 A NEC Class 2, 24 V, DC, PUSH IN, M12, A-coded
| Version | FieldPower® power supply unit, IP65, 3 x 4 A NEC Class 2, 24 V, DC, PUSH IN, M12, A-coded |
| Order No. | 8000050554 |
| Type | FP SOL TOP3 24/10 2 001 |
| GTIN (EAN) | 4050118741858 |
| Qty. | 1 items |
| 220 mm | |
| Depth (inches) | 8.661 inch |
| Height | 215 mm |
| Height (inches) | 8.465 inch |
| Width | 240 mm |
| Width (inches) | 9.449 inch |
| Net weight | 4,614 g |
| Storage temperature | -10 °C...60 °C |
| Operating temperature | -20 °C...40 °C |
| Operating temperature range | -20 °C... +40 °C (regard derating) Start up ≥ -40 °C |
| Humidity | 35…85%, non condensing and non freezing |
| REACH SVHC | Lead 7439-92-1 Potassium perfluorobutane sulfonate 29420-49-3 |
| SCIP | 7645f3b1-6db9-495d-9e21-ab1d894aff05 |
| AC current consumption | 0,7 A @ 400 V DC / 0,8 A @ 320 V AC |
| AC input voltage range | 3 x 320...3 x 575 V AC / 2 x 360...2 x 575 V AC |
| Connection system | PUSH IN |
| DC input voltage range | 450...800 V DC (max. 500 V DC acc. to UL508) |
| Frequency range AC | 45…65 Hz |
| Input fuse (internal) | 2.5 A 50 kA / 500 V AC (6.3 x 32 mm) |
| Inrush current | Max. 10 A |
| Recommended back-up fuse | 2 - 3 A, Char. C |
| Surge protection | Suppressor diode |
| Wire connection method | PUSH IN |
| Adjustable rated current | No |
| Capacitive load | 4.700 µF |
| Connection system | PUSH IN |
| Nominal output current for Unom | 3 x 3.8 A @ 40 °C |
| Output current | 3 x 4 A NEC Class 2 |
| Output current at 40 °C | 3 x 3.8 A |
| Output power | 240 W |
| Output voltage | 24 V |
| Output voltage type | DC |
| Output voltage, max. | 28.8 V |
| Output voltage, min. | 22.5 V |
| Output voltage, note | (adjustable via potentiometer) adjusted to 25 V |
| Rated output voltage | 24 V DC ± 1 % |
| Surge protection | Suppressor diode |
| Switch-on delay | 1 s |
| Triggering characteristic | see characteristic curve |
| Wire connection method | PUSH IN |
| Humidity | 35…85%, non condensing and non freezing |
| Installation advice | Lid screws included |
| Protection degree | IP65 |
| Short-circuit protection | Yes internal |
| Surge voltage category | II III |
| Surge voltage category | II III |
| Connection system | PUSH IN |
| Conductor cross-section, AWG/kcmil , max. | 26 |
| Conductor cross-section, AWG/kcmil , min. | 12 |
| Conductor cross-section, flexible , max. | 2.5 mm² |
| Conductor cross-section, flexible , min. | 0.14 mm² |
| Conductor cross-section, rigid , max. | 2.5 mm² |
| Conductor cross-section, rigid , min. | 0.14 mm² |
| Connection system | PUSH IN |
| Number of terminals | 3 x 2 (+ / -) |
| Certificate no. (cULus) | E223801 |
| Institute (cULus) | CULUS |
| Cable gland clamping area, max. | 12 mm |
| Cable gland clamping area, min. | 6 mm |
| Cable gland material | Polyamide 6 |
| Number of cable glands | 4 |
| AC current consumption | 0,7 A @ 400 V DC / 0,8 A @ 320 V AC |
| AC input voltage range | 3 x 320...3 x 575 V AC / 2 x 360...2 x 575 V AC |
| DC input voltage range | 450...800 V DC (max. 500 V DC acc. to UL508) |
| Frequency range AC | 45…65 Hz |
| Recommended back-up fuse | 2 - 3 A, Char. C |
| Surge protection | Suppressor diode |
| Inrush current | Max. 10 A |
| Input fuse (internal) | 2.5 A 50 kA / 500 V AC (6.3 x 32 mm) |
| Adjustable rated current | No |
| Capacitive load | 4.700 µF |
| Number of terminals | 3 x 2 (+ / -) |
| Output current | 3 x 4 A NEC Class 2 |
| Output power | 240 W |
| Output voltage | 24 V |
| Output voltage type | DC |
| Output voltage, max. | 28.8 V |
| Output voltage, min. | 22.5 V |
| Output voltage, note | (adjustable via potentiometer) adjusted to 25 V |
| Switch-on delay | 1 s |
| Triggering characteristic | see characteristic curve |
| Rated output voltage | 24 V DC ± 1 % |
| Nominal output current for Unom | 3 x 3.8 A @ 40 °C |
| Connection data - terminal strip |
|
| Approval/Certificate/Document of Conformity | [UL Certificate FieldPower® industrial control panel](https://mdcop.weidmueller.com/mediadelivery/asset/900_253602) [CE Declaration of Conformity Fieldpower® PROtop and maxGUARD](https://mdcop.weidmueller.com/mediadelivery/asset/900_245213) |
| User Documentation | [Manual FieldPower® PROtop and maxGUARD size 2](https://mdcop.weidmueller.com/mediadelivery/asset/900_252879) |
| Catalogues | [Catalogues in PDF-format](LINK/Catalog.html) |
| ETIM 6.0 | EC002540 |
