Distance sensor VDM28-8-L1/73c/136
Brand: Pepperl+Fuchs
Code: VDM28-8-L1/73c/136
Universal distance sensor, measurement to object, measuring method PRT, 8 m detection range, red laser light, laser class 1, push-pull output, M12 plug, Distance measurement using object, Measuring method PRT (Pulse Ranging Technology), Accurate, clear, and reproducible measuring results, Red laser as the light emitter, Laser class 1, eyesafe
Datasheet excerpt: Technical data of VDM28-8-L1/73c/136
| Product Description |
|---|
| Universal distance sensor, measurement to object, measuring method PRT, 8 m detection range, red laser light, laser class 1, push-pull output, M12 plug |
| General specifications | ||
|---|---|---|
| Measurement range | 0.2... 8 m | |
| Reference target | Kodak white (90%) | |
| Light source | laser diode typ. service life 85,000 h at Ta = +25 °C | |
| Light type | modulated visible red light | |
| Laser nominal ratings | ||
| Note | LASER LIGHT , DO NOT STARE INTO BEAM | |
| Laser class | 1 | |
| Wave length | 660 nm | |
| Beam divergence | < 1.5 mrad | |
| Pulse length | approx. 4 ns | |
| Repetition rate | 250 kHz | |
| max. pulse energy | < 1.5 nJ | |
| Angle deviation | max. ± 2° | |
| Measuring method | Pulse Ranging Technology (PRT) | |
| Diameter of the light spot | < 10 mm at a distance of 8 m at 20 °C | |
| Ambient light limit | 50000 Lux | |
| Temperature influence | typ. ≤ 0.25 mm/K | |
| Functional safety related parameters | ||
| MTTFd | 200 a | |
| Mission Time (TM) | 10 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Operation indicator | LED green | |
| Function indicator | 2 LEDs yellow for switching state | |
| Teach-In indicator | Teach-In: LED green/yellow equiphase flashing; 2.5 Hz Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz | |
| Control elements | 5-step rotary switch for operating modes selection (threshold setting and operating modes) | |
| Control elements | Switch for setting the threshold values | |
| Electrical specifications | ||
| Operating voltage | 10... 30 V DC , class 2 | |
| Ripple | 10 % within the supply tolerance | |
| No-load supply current | ≤ 125 mA / 24 V DC | |
| Time delay before availability | 1.5 s | |
| Output | ||
| Signal output | 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 100 mA | |
| Switching frequency | 50 Hz | |
| Response time | 10 ms | |
| Conformity | ||
| Product standard | EN 60947-5-2 | |
| Laser safety | IEC 60825-1:2007 | |
| Measurement accuracy | ||
| Absolute accuracy | ± 25 mm | |
| Repeat accuracy | < 5 mm | |
| Approvals and certificates | ||
| Protection class | III | |
| UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| FDA approval | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 | |
| Ambient conditions | ||
| Ambient temperature | -30... 55 °C (-22... 131 °F) | |
| Storage temperature | -30... 70 °C (-22... 158 °F) | |
| Mechanical specifications | ||
| Housing width | 25.8 mm | |
| Housing height | 88 mm | |
| Housing depth | 54.6 mm | |
| Degree of protection | IP67 | |
| Connection | 4-pin, M12 x 1 connector | |
| Material | ||
| Housing | Plastic ABS | |
| Optical face | PMMA | |
| Mass | 90 g | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270916 |
| ECLASS 12.0 | 27270916 |
| ECLASS 11.0 | 27270801 |
| ECLASS 10.0.1 | 27270801 |
| ECLASS 9.0 | 27270801 |
| ECLASS 8.0 | 27270801 |
| ECLASS 5.1 | 27270801 |
| ETIM 9.0 | EC001825 |
| ETIM 8.0 | EC001825 |
| ETIM 7.0 | EC001825 |
| ETIM 6.0 | EC001825 |
| ETIM 5.0 | EC001825 |
| UNSPSC 12.1 | 41111613 |
Check out any spare parts and components from the Pepperl+Fuchs catalog!
Do you want to order a Distance sensor VDM28-8-L1/73c/136 with code: VDM28-8-L1/73c/136?
Leave your request on our website for immediate assistance!
