Read head WCS3B-LS410H

Code: WCS3B-LS410H

CANopen interface, Non-contact, absolute position encoder, Automatic detection of dirt accumulation, Extended temperature range

Datasheet excerpt: Technical data of WCS3B-LS410H

General specifications
Passage speed		≤ 12.5 m/s
Measuring range		max. 314.5 m
Free tolerances to code rail		horizontal: 31 mm ( ± 15.5 mm ) vertical: 28 mm ( ± 14 mm )
Resolution		± 0.4 mm (1,250 positions/m)
Functional safety related parameters
MTTF_d		53 a
Mission Time (T_M)		10 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
Operation indicator		LED green: power on
Data flow indicator		LED yellow: data communication active
Error indicator		LED red flashing: read head outside of code rail solid on: internal diagnostic test failed
Electrical specifications
Operating voltage		10... 30 V DC
Power consumption		11 VA at 24 V DC
Interface
Interface type		CANopen , galvanically isolated
Data output code		binary code
Transfer rate		max. 1 MBit/s
Termination		switchable
Standard conformity
Emitted interference		DIN EN 61000-6-4
Noise immunity		DIN EN 61000-6-2
Shock resistance		DIN EN 60068-2-27, half sine 30 g, 18 ms
Vibration resistance		DIN EN 60068-2-6, sine, 5 g, 10 - 2000 Hz, 10 cycles
Approvals and certificates
CSA approval		cCSAus Certified, General Purpose Class 2 power source
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Operating temperature		-40... 60 °C (-40... 140 °F)
Storage temperature		-40... 85 °C (-40... 185 °F)
Mechanical specifications
Connection type		5-pin, M12 x 1 connector
Degree of protection		IP54
Material
	Housing	ABS , PC (Polycarbonate)
Mass		500 g
General information
Ordering information		Mounting plate included with delivery